Tag Archives: First Footage

Chronos Camera Must Have Accessories!

Chronos Camera Must Have Accessories

So now that many Kickstarter backers have received the Chronos 1.4 including HSC, we have had a few days to test it out and see what kind of accessories the camera needs to be customized for full usability.  There are quite a few hardware cages that may fit it but we rather use the camera as is with some clever low-cost fixes.

The camera is performing well with operation being solid for the 4 days we have taken it through its paces.  Some things do scream out as essentials in order for the camera to be safe from drops and shield it from the sun in order to see the LCD screen properly which is not particularly good in direct sunlight as most LCDs suffer from this.[...] → Continue Reading Full Post ←

Chronos 1.4 First Day Test Footage !

Chronos 1.4

Today we received the Chronos 1.4 camera from krontec.ca and we had just about 2 hours of overcast sunlight to give it a test drive. We have big expectations for this affordable slow motion Kickstarter project camera and will be putting it through its paces soon enough.  We are sharing our first-day production camera test footage which you might find interesting.

We were able to adapt our Canon glass with the help of a C-Mount to EOS mount adapter and it really makes a difference in sharpness and glass quality compared to C-Mount lenses. Not to say that the kit lens is bad by any means but it is simply not to the standards of full frame legendary Canon glass.  It is a big plus to be able to adapt almost any lens to the Chronos which opens up a lot of experimentation possibilities.[...] → Continue Reading Full Post ←

Chronos 1.4 Footage From Final Camera is Great!

Chronos 1.4 Footage

The Chronos 1.4 has been shipping to early bird backers for the past week and the cameras continue to be produced at a hectic pace. We are sharing footage from the final production camera that user Gyppor received and needless to say it is quite good.  The resolution being 1280*1024 at its highest option or 1280*720p  HD as a more common mode creates a pleasing image with very little aliasing and good noise control.

The Luxima Technology  LUX1310 2/3 sized sensor is delivering very good performance that is closer to a 1″ due to the big pixel sizes at 6.6µm compared to say a Galaxy S8 at 1.2µm, these pixels are gigantic.  Even comparing a 1″ Sensor in the Sony RX100 V camera at 2.4µm bodes well for the Chronos 1.4 with nearly 3 times the size.[...] → Continue Reading Full Post ←

fps1000 Project Update July 2016!

fps1000 High speed Cameras

The fps1000 affordable high speed camera has hit several milestones recently such as shipping the platinum fps1000 and some users actually producing first footage with them. The focus now is on shipping the rest of the gold and  silver models which were lower spec and cost versions which were part of the original Kickstarter campaign in 2014 here.[...] → Continue Reading Full Post ←

fps1000 Platinum 500fps first user footage!

fps1000 DragonflyPlatinum_byPeterCarsten

The fps1000 Platinum camera capable of 500fps at 720p resolution has started arriving at the doorstep of Kickstarter backers this week. Production is continuing to fill the backlog of orders and should proceed later on with other models like the fps1000 4k which we are expecting.

One of the first people to get the camera is Peter Carsten an early backer and he has started to post some footage tests of birds in flight with the camera. Peter was kind enough to share his footage and even a sample frame for us to test in our RAW DNG Converter.[...] → Continue Reading Full Post ←

fps1000 May Update Shows 4k Prototype!

fps1000_4kBodyEFmount

The fps1000 May update shows for the first time the camera case with a compatible Canon EF mount attached of the Platinum 4k model.  However it is confirmed as well that some Platinum standard models which have a top recording rate of 720p HD at 500fps have been shipping in small quantities to backers.

There were some heat issues with the Platinum 4k when pushed to the higher frame rate spec and a new board with the corrections is already shipping back from manufacturing to be tested. This should be the last revision of the board and final testing should begin.[...] → Continue Reading Full Post ←