Tag Archives: HEX

fps2000 & fps4000 Camera Line Specs Released!

fps2000 & fps4000 Cameras

After a long hiatus since the fps1000 project was founded, Graham Rowan the creator of both that Kickstarter project and the fps1000HD which has shipped to backers; is now announcing two new camera specs aimed at satisfying the original Kickstarter project backers who did not receive their camera.  The new models replace the fps1000 original, Hex and 4k models in a six camera matrix that is divided into two main lines.

The first line is the fps2000 which has a whopping 320 Gigabytes of flash memory that will record up to 120 seconds of continuous video at the maximum resolution and highest frame rate of 2000fps.  The fps4000 line is essentially double the speed of the camera maximum frame rate of 4000fps depending on configuration and 640 Gigabytes of flash storage. → Continue Reading Full Post ←

fps1000HD Software Update Ads USB3!

fps1000HD Software Update

The fps1000HD camera has been shipping to the majority of the Kickstarter backers and initially it was limited in scope to a specific ISO, frame rate and other common settings.  That all changes with the latest firmware update which unleashes ISO, resolution selection, and USB3 support for live monitoring , control and real time video transfer up to 60fps.

While the software is still not downloadable it will be in a few days when a few bugs have been squashed. All owners of the fps1000HD will be able to upgrade their cameras and all future shipped cameras will also have the new firmware. → Continue Reading Full Post ←

fps1000HD is Now Shipping in Quantity!

fps1000HD

The second fps1000 Kickstarter campaign the fps1000HD has reached a milestone with full production and all backer cameras to be shipped by mid January 2017.  The camera design was finalized before the campaign so no unforeseen technical problems would impede it’s production.

Most orders will ship via UPS unless a special request is made. The cameras ship with 256GB of Fast Flash Memory that give them a continuous recording of 720p video at 1000fps for up to 2 full minutes which is enough time for 83 minutes when played back at 24p on a video timeline.  The cameras record in DNG RAW sequences so that will be quite a lot of files. → Continue Reading Full Post ←

fps1000HD Production Status + Double the Memory!

fps1000HD Production Line!

The latest update from the fps1000 camera front shows the production line of sensor boards with memory and other parts. Production is ongoing and cameras are on schedule to start shipping to Kickstarter Backers next week or Dec 12-18+.  This is on schedule as planned and after testing and quality control they should start reaching buyers by the end of the month which is a welcome development.

The other update is that due to flash memory chips having density increases on the same die; the fps1000HD cameras will now be shipped with 256GB of fast Flash memory instead of the  128GB initially planned at no extra cost to the buyer.  This effectively increases recording time from 1 minute to a full 2 minutes which is an eternity in slow motion cameras. → Continue Reading Full Post ←

fps1000 HD Kickstarter October Progress Report!

fps1000 HD Update Progress October 2016

Graham Rowan the creator of the fps1000 HD high speed camera project and founder of the Slow motion camera company Ltd. has posted a big progress report that backers of the project have anticipated for a few weeks.  It is now reported that the campaign funds have been released by Kickstarter and can be applied to fulfill component orders.

Rowan has been busy building the component assembly pipeline and securing part orders from PCBs to sensors and memory.  According to the update fps1000 HD cameras should begin shipping with near certainty by the end of November or early December this year. → Continue Reading Full Post ←

fps1000 Hardware Update June 28th 2015!

fps1000PreProdOne

It has been a little bit over a month since the last update of the fps1000 was posted. This time around it is all about the electronics and how they fit into the aluminum case and the first look at how it all fits in a tight package.

For the first time we get a glimpse other than CAD renderings of what the camera looks like when it is enclosed; we also get a look at the big touch 5″ LCD on the back being fitted with a recessed  beveled edge.   The camera will mainly be operated by a touch interface on the back of the screen. → Continue Reading Full Post ←