Tag Archives: parts

Dain app GPU and why you should wait for 2021!

Dain app GPU

Probably no computer-related technology has received more attention on the PC side than GPUs.  NVidia launched the 3000 series of cards with aggressive pricing that completely obliterate the previous 2000 series GPUs for much less money. Things are great for PC gamers, machine learning coders, and 3D animators in 2020 with these levels of performance except for the fact that there is a complete scarcity of GPU cards in most lines including but not limited to the 2000 and 3000 series for a variety of reasons.

Dain app the machine learning frame rate interpolation software uses CUDA v5.0 as the minimum requirement or a GeForce GTX 750 as the minimum card to run it. But that does not mean it will be fast or be able to finish interpolating your high res footage. In fact, a 720p clip interpolated frame rate needs about 10-11GB of VRAM memory on the card as it runs the entirety of the calculation in video memory for predictive algorithms to work. → Continue Reading Full Post ←

Chronos Kickstarter Camera One Year Later!

Chronos Kickstarter Camera

David Kronstein has published a walkthrough video of the Krontech warehouse, assembly installations, and offices located near Vancouver Canada, in what could be described as a rapid expansion of a startup that just a year ago was just coalescing.  With now 337 Chronos 1.4c cameras shipped to Kickstarter backers and also direct purchase buyers; this is a significant number of units for any high-speed camera and we can probably expect that number to increase!

David also goes shares his thanks to the people who helped make the camera project possible and where the company can grow from here. We expect great things from Krontech not that they have shown the ability to mass produce gear that works and as it continues to improve with software releases. We are excited about their future and congratulate them on their success thus far. → Continue Reading Full Post ←

Chronos 1.4 Software Update 0.2

Chronos 1.4 Software

The Chronos 1.4 Camera is getting its first firmware update from 0.1 to 0.2 to add a few feature, correct a few bugs and some interface changes.  The update is recommended for all owners and it is very easy to install. Be sure to have a FAT32 formatted USB stick in order to perform the update as it needs the root directory for file discovery.

We applied the update on our camera and were pleasantly surprised that the actual software update did not need the camera to be turned off after. It seems that the Chronos team is making updates on the internal SD memory and not on a firmware chip which also means you cannot brick the camera by updating. Very cool feature! → Continue Reading Full Post ←

Chronos 1.4 Mods Make Improvements!

Chronos 1.4 Mods

We would like to share a few modifications users of the Chronos 1.4 have made to the camera in the few short weeks they have had to put it through its paces.  In our case, we got the Pro AM 5″ Sunshade for LCD screens and had great success curing what could have been a big nuisance for the camera.  In bright daylight, the Chronos screen completely washes out like most phones out there and makes it impossible to judge focus, controls and reviewing clips.

There are also case mods and more strap accessories that have made the camera better.   While the software is still in the early stages, the camera is fully functional and has been able to deliver outstanding image quality.  There are a few image artifacts that firmware will address in the future, that are pushing back our full review of the camera. For those that have been asking, rest assured we are on it! → Continue Reading Full Post ←

Chronos Camera Must Have Accessories!

Chronos Camera Must Have Accessories

So now that many Kickstarter backers have received the Chronos 1.4 including HSC, we have had a few days to test it out and see what kind of accessories the camera needs to be customized for full usability.  There are quite a few hardware cages that may fit it but we rather use the camera as is with some clever low-cost fixes.

The camera is performing well with operation being solid for the 4 days we have taken it through its paces.  Some things do scream out as essentials in order for the camera to be safe from drops and shield it from the sun in order to see the LCD screen properly which is not particularly good in direct sunlight as most LCDs suffer from this. → Continue Reading Full Post ←

Chronos 1.4 First Day Test Footage !

Chronos 1.4

Today we received the Chronos 1.4 camera from krontec.ca and we had just about 2 hours of overcast sunlight to give it a test drive. We have big expectations for this affordable slow motion Kickstarter project camera and will be putting it through its paces soon enough.  We are sharing our first-day production camera test footage which you might find interesting.

We were able to adapt our Canon glass with the help of a C-Mount to EOS mount adapter and it really makes a difference in sharpness and glass quality compared to C-Mount lenses. Not to say that the kit lens is bad by any means but it is simply not to the standards of full frame legendary Canon glass.  It is a big plus to be able to adapt almost any lens to the Chronos which opens up a lot of experimentation possibilities. → Continue Reading Full Post ←