Tag Archives: firmware

CHRONOS 1.4 SOFTWARE V0.3 RC2 Released!

Chronos 1.4 Software V0.3 RC2

The Chronos 1.4c Team has released the latest v0.3 RC2 software for testing.  Be aware that this is not mission critical stable software so only use on your own private testing and not for recording mission critical shoots.  The Interface can now be flipped to the left side though we would love to see an option to be concentrated on the lower part for better screen real-estate distribution.

We have tested over the last few days and are happy to report that the software has been stable and rock solid with no lock-ups and no sluggishness.  The Color science was improved since the first v0.3 RC1 release to render the red colors among others more faithfully. In our testing, there was a definite improvement but we would like to see better treatment of the deep blues and magentas. We are happy to see White Balance is now supporting built-in presets! → Continue Reading Full Post ←

FUJIFILM X-T2 vs X-H1 Slow Motion Quality Comparison by CVP!

The FUJIFILM X-H1 which offers 120fps 1080p slow motion was a worthwhile effort to offer high frame rates that are usable to their video-centric base. It still was not as good as the Sony or Panasonic slow motion options due to aliasing, moire, and noise but with a little post work, it could be used with success in an edited piece.  FUJI then with a firmware update for their stills flagship the X-T2 allowed the camera to now shoot the same 120fps 1080p slow motion which makes sense considering they use the same sensor on both cameras.

The camera site CVP has done a full comparison review here which pits the X-H1 against the X-T2 to see which camera strengths are ahead on each body and if it makes sense for X-T2 owners who are invested in a FUJI lens system to upgrade.  Their findings are interesting and as far as slow motion it is clear that while they use most of the same imaging pipeline; the X-H1 has the edge with less crop, less aliasing, and better artifact suppression when using the 120fps slow motion mode. → Continue Reading Full Post ←

Chronos 1.4 Software V0.3 RC1 Released for Testing!

Chronos 1.4 Software V0.3 RC1

The Chronos 1.4c Team has been ramping up software releases with the latest v0.3 RC1 being dropped just a few hours ago.  Be aware that this is not mission critical stable software so only use on your own testing and not for recording once in a lifetime events.  The big fixes are in the color pipeline and how the camera handles pixel color especially red tones which were a little pinkish in previous software releases. It seems the entire color acquisition pipeline has received an overhaul. This should improve the color rendition on all objects plus the added benefit of less tweaking in post.

There are also several UI improvements like the ability to clear some warnings, move the button layout pane around the main interface screen and the ability to auto-save clips after shooting.   HSC will be testing the new software and report back when we get some new images.  We are preparing a color test to see before and after the software update and how much color has improved with the release. → Continue Reading Full Post ←

Krontech Gets a Visit From Linus Tech Tips!

Krontech Gets a Visit From Linus Tech Tips! 1.4 Linus Tech Tips

Linus Tech Tips is probably the most well-known hardware enthusiast show on the net today. You can find all sorts of cool geeky stuff tested, assembled and destroyed in some cases.  This time it was the turn for Krontech.ca to get a visit from the Linus team which funnily enough is very close to them geographically in the vicinity of Vancouver BC, Canada.

There is a quick tour around the startup headquarters as well as a nostalgic look back at the prototype cameras that evolved in what we know today as the Chronos 1.4c which is capable of 1,502fps at 720p resolution and recently able to record in RAW 16bit DNG format which makes it professionally usable in any setting given an adequate amount of light. → Continue Reading Full Post ←

GH5 Firmware 2.2 Update for VFR And More!

GH5 Firmware 2.2 Update

Panasonic has released an updated firmware that claims to fix some instability issues while recording video at higher frame rates using VFR. The Firmware Version 2.2 Available here aims to reduce or eliminate instances where the camera could stop recording video or in some instances refuse to record in VFR mode. Some users have reported rare incidents of corrupted files, recording stops and some camera lockups that could be related to the VFR function buffer and write to SD card procedure.  It will be a matter of testing this new firmware to see if it resolves these issues.

In some instances, it was narrowed down to slow SD cards that could not keep up with the data rates necessary or cards that had internal fragmentation that could cause corruption on clips.  Glad to see Panasonic addressing this issue. The camera also adds a new menu item for customizing the function button on the new Leica H-ES200 200mm 2.8 lens to different parameters.  Firmware Link! → Continue Reading Full Post ←

Chronos Kickstarter Camera One Year Later!

Chronos Kickstarter Camera

David Kronstein has published a walkthrough video of the Krontech warehouse, assembly installations, and offices located near Vancouver Canada, in what could be described as a rapid expansion of a startup that just a year ago was just coalescing.  With now 337 Chronos 1.4c cameras shipped to Kickstarter backers and also direct purchase buyers; this is a significant number of units for any high-speed camera and we can probably expect that number to increase!

David also goes shares his thanks to the people who helped make the camera project possible and where the company can grow from here. We expect great things from Krontech not that they have shown the ability to mass produce gear that works and as it continues to improve with software releases. We are excited about their future and congratulate them on their success thus far. → Continue Reading Full Post ←