Category Archives: Firmware/Software

OSMO Pocket will do 200fps with a catch!

OSMO Pocket 200fps

It looks like DJI has not set in stone the frame rate spec of the recently released OSMO Pocket which we found to be excellent in handling and gives a beautiful low light stabilized image considering the small sensor size and price. It even beat out the GoPro Hero 7 in dynamic range and noise control but fell short of frame rates being on our good side. Thanks to our reader Frank for the tip!

In a new video by Drone NewsGuy from Youtube, the pro app and latest beta firmware for the OSMO Pocket are tested and you can enable a somewhat hidden setting to get 200fps in real terms out of the small device. The catch is that the setting requires the phone app to be activated every time you want to use it and will remain there until you change settings to something else. We would love for DJI to allow the 200fps setting right out of the box on the interface and not only that, allow for even greater fps in 720p mode and even a small VGA mode for users needing that extra frame rate. → Continue Reading Full Post ←

Pocophone F1 will get 960fps Slow Motion Mode!

Pocophone F1 Slow Motion

The Pocophone F1 by Xiaomi is an ultra-budget phone about $289 USD on some places for the 64GB model which feels anything but cheap. It has a 4000mAh battery, 6GB of RAM, dual cameras and a Notch screen all powered by a Snapdragon 845.  Now the software updates will include a 960fps mode in 1080p for a very short rec time. Some initial tests put it at 25MB in size which might be about 0.2sec.

So you get a phone that also will shoot the 4k 60fps spec with the update but what about the video quality?  Actually, it is not that bad and quite competitive with some mid-range phones.  It will not be flagship quality like those $800 USD + phones but it will get the job done. When it comes to slow motion 120 and 240fps 1080p mode it does lower quality quite a bit which may be a preview of the quality that the 960fps mode will deliver. → Continue Reading Full Post ←

DJI OSMO Pocket Slow Motion will have 120fps!

Early on in the beta testing of the device, the OSMO Pocket by DJI released this week had gimbal stabilized 1080p 120fps included in the specs. However, by launch, the slow motion frame rate disappeared. There were anecdotal discussions that the device overheated in the mode and that is why it was pulled out of the product launch. However, there are no official statements to back this up.

DJI Should release the new firmware update for the OSMO Pocket by December 15th just in time for Christmas delivery of the product. At Just $349 USD, it will probably be a GoPro killer as a stocking stuffer during the holiday season.  Initial samples show the low light video quality besting the GoPro but the slow-motion mode is still less detailed than the Action Camera.  The stabilization is incredible and beats everything in its price range including the Hero 7 Black. → Continue Reading Full Post ←

Mi 8 and Mi 8 Explorer Get 960fps Firmware Update!

Mi 8 and Mi 8 Explorer

Xiaomi is soon releasing a new Firmware Update:  ROM – MIUI V10.1.2.0.PEHCNFI – based on Android 9 Pie and available first in China now.  The 2.1 GB update will include two new features that will make these phones more competitive. Search online for the ROM – MIUI V10.1.2.0.PEHCNFI  and be sure to follow the instructions while updating your phone.

The first feature is the inclusion of a 960fps slow-motion mode which is a big increase from the 240fps max setting before. As with other Xiaomi releases of the past, the slow motion samples are very hard to find or non-existent and there is a huge likelihood that they will use image interpolation from that same 240p to yield the 960fps. In a previous article, we referenced this test that showed the Xiaomi Mi Mix 3 using clear software interpolation to reach those frame rates. → Continue Reading Full Post ←

Chronos 1.4 Firmware 0.3.1 b9 Unleashes New Features!

Chronos 1.4 Firmware

The Chronos 1.4c team based in B.C. Canada has been hard at work unleashing the features of the camera hardware and adding software features that should make the camera more valuable to video professionals everywhere. The new firmware adds HDMI live mirroring support for monitoring which is clean and lets you record its output. Another feature is the inclusion of native CinemaDNG save format image sequences which retain 16bits of color data and allow you to really streamline the workflow without time-consuming conversions.

In our testing over the last 4 days, we have really put the firmware “available here” through its paces and found very minimal issues in the software related to usability but no freezes and rock solid operation over around 14hrs of operation.   By saving to CinemaDNG we have no issues with cards getting write space errors due to saving the 1.8MB files individually. We feel this format is really unleashing the camera’s quality fully with a faithful sensor capture representation. → Continue Reading Full Post ←

Z Cam E2 Starts Shipping To Customers!

The Z Cam E2 has finally started shipping and is now available for direct order at their site. The camera caught our attention for its low price of just $1999 and the high frame rate features of 240fps 1080p and 120fps 4k.  It seems to be using the same 4/3 sensor as the great Panasonic GH5s but with extended features.

The camera company ZCam has also released some samples in a variety of scenarios so you can see what the camera is capable of. At first inspection, it is clear this camera is a clear step up from the Z Cam E1 which had some image quality issues. The E2 seems to go out of the box ready to produce class-leading imagery and offer some very nice high frame rate action. There are also some rumored comments that suggest the team is testing 300fps at 720p as an added bonus for future software. → Continue Reading Full Post ←